CCNA Books 2024

If you’re looking for CCNA Books because you want to pass your CCNA exam this year 2023, you’re in the right place. The CCNA certification builds the foundation for Cisco Network Engineers.

In the dynamic technology landscape, staying on top of the latest technology trends is a must in 2023, especially if you want to build a career in network administration. Achieving the CCNA 200-301 certification will validate your knowledge of networking concepts. is supported by readers. We may earn a commission when you buy with our links at no extra cost to you.

The following CCNA Certification Books are the currently available CCNA Certification Guides for the 200-301 exam that can also be accessed today at the O’Reilly Learning Platform, also for network engineers.

CCNA 200-301 Official Cert Guide Library

Cisco Press has the only study guides approved by Cisco for the new CCNA certification. The new edition of these two best-selling CCNA books includes:

  • Updated content
  • New online practice exercises
  • More than 400 practice exam questions
  • More than 2 hours of video training
  • CCNA Network Simulator Lite Editions with 34 free Network Simulator labs (available on the companion website).

CCNA 200-301 Official Cert Guide Library

Author: Wendell Odom, CCIE No. 1624 Emeritus

Published: December 31, 2019

Publisher: Cisco Press

CCNA 200-301 Official Cert Guide Library Volume 1

  • Chapter 1 Introduction to TCP/IP Networking 
  • Chapter 2 Fundamentals of Ethernet LANs 
  • Chapter 3 Fundamentals of WANs and IP Routing 
  • Chapter 4 Using the Command-Line Interface 
  • Chapter 5 Analyzing Ethernet LAN Switching 
  • Chapter 6 Configuring Basic Switch Management 
  • Chapter 7 Configuring and Verifying Switch Interfaces 
  • Chapter 8 Implementing Ethernet Virtual LANs 
  • Chapter 9 Spanning Tree Protocol Concepts 
  • Chapter 10 RSTP and EtherChannel Configuration 
  • Chapter 11 Perspectives on IPv4 Subnetting 
  • Chapter 12 Analyzing Classful IPv4 Networks 
  • Chapter 13 Analyzing Subnet Masks 
  • Chapter 14 Analyzing Existing Subnets 
  • Chapter 15 Operating Cisco Routers 
  • Chapter 16 Configuring IPv4 Addresses and Static Routes 
  • Chapter 17 IP Routing in the LAN 
  • Chapter 18 Troubleshooting IPv4 Routing 
  • Chapter 19 Understanding OSPF Concepts 
  • Chapter 20 Implementing OSPF 
  • Chapter 21 OSPF Network Types and Neighbors 
  • Chapter 22 Fundamentals of IP Version 6 
  • Chapter 23 IPv6 Addressing and Subnetting 
  • Chapter 24 Implementing IPv6 Addressing on Routers 
  • Chapter 25 Implementing IPv6 Routing 
  • Chapter 26 Fundamentals of Wireless Networks 
  • Chapter 27 Analyzing Cisco Wireless Architectures 
  • Chapter 28 Securing Wireless Networks 
  • Chapter 29 Building a Wireless LAN

CCNA 200-301 Official Cert Guide Library Volume 2

  • Part I IP Access Control Lists
    • 1 Introduction to TCP/IP Transport and Applications 
    • 2 Basic IPv4 Access Control Lists 
    • 3 Advanced IPv4 Access Control Lists 
  • Part II Security Services
    • 4 Security Architectures 
    • 5 Securing Network Devices 
    • 6 Implementing Switch Port Security 
    • 7 Implementing DHCP 
    • 8 DHCP Snooping and ARP Inspection 
  • Part III IP Services
    • 9 Device Management Protocols 
    • 10 Network Address Translation 
    • 11 Quality of Service (QoS) 
    • 12 Miscellaneous IP Services 
  • Part IV Network Architecture
    • 13 LAN Architecture 
    • 14 WAN Architecture 
    • 15 Cloud Architecture 
  • Part V Network Automation
    • 16 Introduction to Controller-Based Networking 
    • 17 Cisco Software-Defined Access (SDA) 
    • 18 Understanding REST and JSON 
    • 19 Understanding Ansible, Puppet, and Chef 
  • Part VI Final Review
    • 20 Final Review 
  • Part VII Appendixes
    • Appendix A Numeric Reference Tables 
    • Appendix B CCNA 200-301 Volume 2 Exam Updates 
    • Appendix C Answers to the “Do I Know This Already?” Quizzes 
  • Glossary

Both books provide in-depth expert explanations of all protocols, commands, and technologies tested on the CCNA exam. Likewise, practice tests contain scenario-based questions that closely mimic the difficulty of the actual exam.

In these two CCNA books, the best-selling author, Wendell Odom, shares preparation hints and test-taking tips that help you identify areas of weakness and improve both your conceptual knowledge and hands-on skills.

You can also buy these volumes contained in this combo separately. Each volume presents you with an organized test preparation routine with a proven series of elements and techniques.

CCNA 200-301 Official Cert Guide, Volume 1 - Book Cover

CCNA 200-301 Official Cert Guide, Volume 1

Author: Wendell Odom, CCIE No. 1624 Emeritus

Published: October 2019

Publisher: Cisco Press

CCNA 200-301 Official Cert Guide, Volume 2 - Book Cover

CCNA 200-301 Official Cert Guide, Volume 2

Author: Wendell Odom, CCIE No. 1624 Emeritus

Published: December 2019

Publisher: Cisco Press

The “Do I Know This Already?” quizzes open each chapter and enable you to decide how much time you need to spend on each section.

At the end of each chapter, there are Exam Preparation Tasks that help you drill in key concepts you must know thoroughly.

This CCNA 200-301 Official Cert Guide is well regarded for its level of detail, study plans, assessment features, challenging review questions and exercises, video instruction, and hands-on labs. This official study guide helps you master the concepts and techniques that ensure your exam success.

31 Days Before your CCNA Exam: A Day-By-Day Review Guide for the CCNA 200-301 Certification Exam

This CCNA book is thoroughly updated for the current exam. It is a portable guide that offers a complete day-by-day plan for what and how to study. From the basics of switch configuration and IP addressing through modern cloud, virtualization, SDN, SDA, and network automation concepts, you will find it in this CCNA book.

Each day breaks down an exam topic into a short, easy-to-review summary, with Daily Study Resource quick-references pointing to deeper treatments elsewhere.

31 Days Before your CCNA Exam: A Day-By-Day Review Guide for the CCNA 200-301 Certification Exam

Author: Allan Johnson

Published: April 2020

Publisher: Cisco Press

  • Day 31: Networking Models, Devices, and Components 1
  • Day 30: Ethernet Switching 29
  • Day 29: Switch Configuration Basics 41
  • Day 28: IPv4 Addressing 55
  • Day 27: IPv6 Addressing 65
  • Day 26: VLAN and Trunking Concepts and Configurations 83
  • Day 25: STP 99
  • Day 24: EtherChannel and HSRP 113
  • Day 23: DHCP and DNS 127
  • Day 22: Wireless Concepts 149
  • Day 21: WLAN Configuration 163
  • Day 20: LAN Security and Device Hardening 173
  • Day 19: Basic Routing Concepts 195
  • Day 18: Basic Router Configuration 209
  • Day 17: The Routing Table 227
  • Day 16: Inter-VLAN Routing 233
  • Day 15: Static and Default Route Configuration 241
  • Day 14: OSPF Operation 255
  • Day 13: Single-Area OSPF Implementation 265
  • Day 12: Fine-Tuning and Troubleshooting OSPF 275
  • Day 11: Network Security Concepts 285
  • Day 10: ACL Concepts 295
  • Day 9: ACL Implementation 301
  • Day 8: NAT 315
  • Day 7: WAN, VPN, and IPsec 325
  • Day 6: QoS 343
  • Day 5: CDP and LLDP 351
  • Day 4: Device Monitoring, Management, and Maintenance 361
  • Day 3: Cloud, Virtualization, and SDN 379
  • Day 2: SDA and Cisco DNA Center 389
  • Exam Day 407

How this book helps you fit exam prep into your busy schedule:

  • Visual tear-card calendar summarizes each day’s study topic to help you get through everything
  • Checklist offers expert advice on preparation activities leading up to your exam
  • Descriptions of exam organization and sign-up processes help make sure nothing falls between the cracks
  • Proven strategies help you prepare mentally, organizationally, and physically
  • Conversational tone makes studying more enjoyable

CCT/CCNA Routing and Switching All-in-One Exam Guide (Exams 100-490 & 200-301)

This new CCNA book (All-in-One Exam Guide) covers every topic on the current version of Cisco’s CCT and CCNA exams.

Take the 2020 versions of the Cisco Certified Technician (CCT) and Cisco Certified Network Associate (CCNA) exams with complete confidence using the detailed information contained in this highly effective self-study system.

Written by a pair of Cisco networking professionals and training experts, CCT®/CCNA® Routing and Switching All-in-One Exam Guide (Exams 100-490 & 200-301) fully explains all subjects covered on both exams and contains practice questions that mirror those on the live test in tone, format, and content.

CCT/CCNA Routing and Switching All-in-One Exam Guide (Exams 100-490 & 200-301)

Authors: Glen E. Clarke, Richard Deal

Published: January 2021

Publisher: McGraw-Hill

  • Chapter 1: Network Fundamentals
  • Chapter 2: OSI Model
  • Chapter 3: TCP/IP Protocol Suite
  • Chapter 4: IP Addressing Basics
  • Chapter 5: Subnetting & VLSM
  • Chapter 6: Cisco Device Basics
  • Chapter 7: Cisco IOS Basics
  • Chapter 8: Managing a Cisco Device
  • Chapter 9: Switching Basics
  • Chapter 10: Advanced Switching
  • Chapter 11: Static Routing
  • Chapter 12: Dynamic Routing
  • Chapter 13: IP Services
  • Chapter 14: IPv6
  • Chapter 15: Wireless
  • Chapter 16: Security Fundamentals
  • Chapter 17: Implementing Security on Cisco Devices
  • Chapter 18: Automation and Programmability

Beyond fully preparing you for the challenging exam, the book also serves as a valuable on-the-job reference.

CCNA 200-301 Exam Cram, 6th Edition

CCNA 200-301 Exam Cram, Sixth Edition is the perfect study guide to help you pass the Cisco 200-301 CCNA exam, providing coverage and practice questions for every exam topic.

This CCNA book contains an extensive set of preparation tools, including topic overviews, exam alerts, CramSavers, CramQuizzes, chapter-ending review questions, author notes and tips, Packet Tracer labs, and an extensive glossary.

The book also contains the extremely useful Cram Sheet tear-out: a collection of essential facts in an easy to review format. Complementing all these great study tools is the powerful Pearson Test Prep practice test software, complete with hundreds of exam-realistic practice questions.

This assessment software offers you a wealth of customization options and reporting features, allowing you to test your knowledge in study mode, practice exam mode, or flash card mode.

CCNA 200-301 Exam Cram, 6th Edition

Author: Anthony J Sequeira, CCIE No. 15626

Published: May 2020

Publisher: Pearson IT Certification

  • Part 1 – Network Fundamentals
    • Chapter 1: The Role and Function of Network Components 
    • Chapter 2: The Characteristics of Network Topology Architectures 
    • Chapter 3: Physical Interface and Cabling Types 
    • Chapter 4: Describe TCP and UDP 
    • Chapter 5: Configure and Verify IPv4 Addressing and Subnetting 
    • Chapter 6: Configure IPv6
    • Chapter 7: Describe Wireless Principles 
    • Chapter 8: Explain Virtualization Fundamentals 
    • Chapter 9: Describe Switching Concepts 
  • Part 2 – Network Access
    • Chapter 10: Configure and Verify VLANs and Interswitch Connectivity 
    • Chapter 11: Configure and Verify Layer 2 Discovery Protocols
    • Chapter 12: Describe Rapid PVST+ Spanning Tree Protocol
    • Chapter 13: Compare Cisco Wireless Architectures and AP Modes 
  • Part 3 – IP Connectivity
    • Chapter 14: Interpret the Components of a Routing Table 
    • Chapter 15: Configure and Verify IPv4 and IPv6 Static Routing 
    • Chapter 16: Configure and Verify Single Area OSPFv2 
    • Chapter 17: Describe the Purpose of First Hop Redundancy Protocols 
  • Part 4 – IP Services
    • Chapter 18: Configure and Verify Inside Source NAT
    • Chapter 19: Configure and Verify NTP
    • Chapter 20: Configure DHCP and DNS
    • Chapter 21: Other Networking Services 
  • Part 5 – Security Fundamentals
    • Chapter 22: Describe Key Security Concepts
    • Chapter 23: Configure Device Access Control 
    • Chapter 24: Describe Remote Access and Site-to-Site VPNs 
    • Chapter 25: Configure and Verify Access Control Lists 
    • Chapter 26: Configure Layer 2 security features
    • Chapter 27: Describe and Configure Wireless Security Protocols 
  • Part 6 – Automation and Programmability
    • Chapter 28: Automation 
    • Chapter 29: Programmability
  • Part 7 – Practice Exams and Glossary
    • Practice Exam 1
    • Practice Exam 2
    • Glossary

This CCNA book covers the critical information you’ll need to know to score higher on your CCNA exam:

  • Understand networking fundamentals concepts, including network components, network topology architectures, physical interfaces and cabling types, TCP and UDP, wireless principals, switching concepts, and virtualization fundamentals
  • Master IPv4 addressing and subnetting and configure IPv6
  • Configure and verify VLANs, interswitch connectivity, and Layer 2 discovery protocols
  • Describe Rapid PVST+ Spanning Tree Protocol
  • Compare Cisco Wireless Architectures and AP Modes
  • Enable security technologies including device access control, site-to-site and remote access VPNs, ACLs, Layer 2 security features, and wireless security protocols
  • Configure and verify IPv4 and IPv6 static routing and single area OSPF
  • Understand DHCP, DNS, and other networking services like SNMP, syslog, SSH, and TFTP/FTP
  • Configure and verify inside source NAT and NTP
  • Understand how automation affects network management, controller-based and software-defined architectures, and Cisco DNA Center-enabled device management
  • Understand network programmability concepts, including characteristics of REST-based APIs (CRUD, HTTP verbs, and data encoding); configuration management mechanisms such as Puppet, Chef, and Ansible; and learn to Interpret JSON encoded data

CCNA Certification Study Guide, Volume 2

The CCNA Book covers every exam objective, including network components, IP connectivity and routing, network security, virtual networking, and much more:

  • Clear and accurate chapters with real-world examples,
  • hands-on activities,
  • in-depth explanations, and
  • numerous review questions to ensure that you’re fully prepared on exam day.

CCNA Certification Study Guide, Volume 2

Author: Todd Lammle

Published: February 2020

Publisher: Sybex

  • Chapter 1 Network Fundamentals 1
  • Chapter 2 TCP/IP 29
  • Chapter 3 Easy Subnetting 75
  • Chapter 4 Troubleshooting IP Addressing 105
  • Chapter 5 IP Routing 117
  • Chapter 6 Open Shortest Path First (OSPF) 163
  • Chapter 7 Layer 2 Switching 193
  • Chapter 8 VLANs and Inter-VLAN Routing 219
  • Chapter 9 Enhanced Switched Technologies 251
  • Chapter 10 Access Lists 289
  • Chapter 11 Network Address Translation (NAT) 319
  • Chapter 12 IP Services 337
  • Chapter 13 Security 363
  • Chapter 14 First Hop Redundancy Protocol (HSRP) 411
  • Chapter 15 Virtual Private Networks (VPNs) 433
  • Chapter 16 Quality of Service (QoS) 451
  • Chapter 17 Internet Protocol Version 6 (IPv6) 465
  • Chapter 18 Troubleshooting IP, IPv6, and VLANs 495
  • Chapter 19 Wireless Technologies 549
  • Chapter 20 Configuring Wireless Technologies 595
  • Chapter 21 Virtualization, Automation, and Programmability 661
  • Chapter 22 SDN Controllers 689
  • Chapter 23 Configuration Management 743

Written by a leading expert on Cisco technologies and certifications, this comprehensive exam guide also includes access to the acclaimed Sybex online learning system – an interactive environment featuring practice exams, electronic flashcards, a searchable glossary, a self-assessment test, and video tutorials on critical Cisco networking concepts and technologies.

This CCNA book:

  • Covers 100% of all CCNA Exam 200-301 objectives
  • Provides accurate and up-to-date information on core network fundamentals
  • Explains a broad range of Cisco networking and IT infrastructure
  • Features learning objectives, chapter summaries, ‘Exam Essentials’ and figures, tables, and illustrations

Implementing and Administering Cisco Solutions: 200-301 CCNA Exam Guide

This CCNA Book prepares you to take the exam with the essentials of networking, security, and automation. If you want to gain a Cisco CCNA certification and start a career as a network security professional, this book is for you. Although no knowledge about Cisco technologies is expected, a basic understanding of industry-level network fundamentals will help you grasp the topics covered easily.

Implementing and Administering Cisco Solutions: 200-301 CCNA Exam Guide

Author: Glen D. Singh

Published: November 2020

Publisher: Pakt Publishing

  • Section 1: Network Fundamentals
    • Chapter 1: Introduction to Networking
    • Chapter 2: Getting Started with Cisco IOS Devices
    • Chapter 3: IP Addressing and Subnetting
    • Chapter 4: Detecting Physical Issues, Wireless Architectures, and Virtualization
  • Section 2: Network Access
    • Chapter 5: Implementing VLANs, Layer 2 Discovery Protocols, and EtherChannels
    • Chapter 6: Understanding and Configuring Spanning-Tree
  • Section 3: IP Connectivity
    • Chapter 7: Interpreting Routing Components
    • Chapter 8: Understanding First Hop Redundancy, Static and Dynamic Routing
  • Section 4: IP Services
    • Chapter 9: Configuring Network Address Translation (NAT)
    • Chapter 10: Implementing Network Services and IP Operations
  • Section 5: Security Fundamentals
    • Chapter 11: Exploring Network Security
    • Chapter 12: Configuring Device Access Control and VPNs
    • Chapter 13: Implementing Access Control Lists
    • Chapter 14: Implementing Layer 2 and Wireless Security
  • Section 6: Automation and Programmability
    • Chapter 15: Network Automation and Programmability Techniques
    • Chapter 16: Mock Exam 1
    • Chapter 17: Mock Exam 2
  • Assessments
    • Chapter 1
    • Chapter 2
    • Chapter 4
    • Chapter 5
    • Chapter 6
    • Chapter 7
    • Chapter 8
    • Chapter 9
    • Chapter 10
    • Chapter 11
    • Chapter 12
    • Chapter 13
    • Chapter 14
    • Chapter 15
    • Chapter 16 – Mock Exam 1
    • Chapter 17 – Mock Exam 2

By the end of this book, you’ll have gained the confidence to pass the Cisco CCNA 200-301 exam on the first attempt and be well-versed in a variety of network administration and security engineering solutions.

What you will learn:

  • Understand the benefits of creating an optimal network
  • Create and implement IP schemes in an enterprise network
  • Design and implement virtual local area networks (VLANs)
  • Administer dynamic routing protocols, network security, and automation
  • Get to grips with various IP services that are essential to every network
  • Discover how to troubleshoot networking devices


In this post, we covered the contents of the following CCNA certification books:

  • CCNA 200-301 Official Cert Guide Library
  • 31 Days Before your CCNA Exam: A Day-By-Day Review Guide for the CCNA 200-301 Certification Exam
  • CCT/CCNA Routing and Switching All-in-One Exam Guide (Exams 100-490 & 200-301)
  • CCNA 200-301 Exam Cram, 6th Edition
  • CCNA Certification Study Guide, Volume 2
  • Implementing and Administering Cisco Solutions: 200-301 CCNA Exam Guide

Pairing these books with CCNA Online Courses will catapult you into attaining your CCNA certification, and ultimately, your professional career.

Good luck.

Alirio Zavarce Faceshot


Alirio Zavarce, CCIE #28672, is a seasoned enterprise route-switch consultant with 30 years of experience with data networks. Alirio started this networking blog to help his peers become better network engineers and share all his everyday experiences and troubleshooting tips. More about me...

If Alirio had to prepare to take it again, here's what he would do to pass the CCIE lab.

Please Share

Leave a Comment

Share to...